Filters for CamerasThe KELDAN Spectrum Filters are scientifically engineered color correction filters based on spectral measurements of the lighting conditions underwater. KELDAN Spectrum Filters convert the ambient light into a daylight spectrum in order to restore correct colors and to optimise white balancing.
Variant Available: Spectrum Filter SF -1.5 Film 60x60mm Spectrum Filter SF -3.5 B Film 60x60mm Spectrum Filter SF -3.5 G Film 60x60mm Spectrum Filter SF -1.5 Film 80x80mm Spectrum Filter SF -3.5 B Film 80x80mm Spectrum Filter SF -3.5 G Film 80x80mm
KELDAN Spectrum Filters Film
- Contact us to get a quote, place an order, check availability, or pre-order.
Spectrum Filter SF -1.5 Film 80x80
- Item No. 1744
Product description
The Spectrum Filter SF -1.5 is designed to compensate for the light absorption of all water colors and therefore provides a smooth, well balanced light spectrum to the sensor of your camera. This greatly improves the color rendering of your images and adjust the color coordinates close to daylight for outstanding results with manual white balance.
The Spectrum Filter SF -1.5 has a compensation depth of 3.5m. At this depth the filter makes a pertfect compensation of the light absorption of the water column. The camera then sees a daylight spectrum just like shooting at the surface.
The filter is designed to provide optimal performance for any water color from blue to green water. It works best within a depth range of 2 to 15 meters. The filter has a damping equivalent to a loss of 1.5 stops.
For deeper depth we recommend to use either SF -3.5 B (for blue water) or SF -3.5 G (for green water)
The filter can be easily cut to the needed size. The substrate of the filter is a thin plastic sheet.
Three pcs. filter sheets with the size 80x80 mm are shipped in one envelope.
The only difference against the 60x60 is a bigger sheet size.
Spectrum Filter SF -3.5 B Film 80x80
- Item No. 1745
Product description
Using this scientifically engineered Filters will result in beautifully natural colors with manual white balance.
SF -3.5 B is designed to compensates for the light absorption of blue water colors and therefore provides a smooth, well balanced light spectrum to the sensor of your camera. It greatly improves the color rendering of your images and adjust the color coordinates close to daylight for outstanding results with manual white balance.
The Spectrum Filter SF -3.5 B has a compensation depth of 7m. At this depth the filter makes a perfect compensation of the light absorption of the water column. The camera then sees a daylight spectrum just like shooting at the surface.
The filter works best for blue water within a depth range of 6 to 20 meters. The filter has a damping equivalent to a loss of 3.5 stops. Normally low noise cameras that allow to shoot at ISO 1600 or higher are required when using this filter.
IMPORTANT: If you experience problems wit too low light level switch to a lighter filter such as the SF -1.5 (loss equivalent to 1.5 stops). The use of a lighter filter is always the better option than using no filter at all!
The filter can be easily cut to the needed size. The substrate of the filter is a thin plastic sheet.
Three pcs. filter sheets with the size 80x80 mm are shipped in one envelope.
The only difference against the 60x60 is a bigger sheet size.
Spectrum Filter SF -3.5 G Film 80x80
Item No. 1746
Product description
The Spectrum Filter SF -3.5 G is designed to compensate for the light absorption of green water colors and therefore provides a smooth, well balanced light spectrum to the sensor of your camera. This greatly improves the color rendering of your images and adjust the color coordinates close to daylight for outstanding results with manual white balance.
The Spectrum Filter SF -3.5 G has a compensation depth of 6m. At this depth the filter makes a pertfect compensation of the light absorption of the water column. The camera then sees a daylight spectrum just like shooting at the surface.
The filter works best for green water within a depth range of 6 to 20 meters. The filter has a damping equivalent to a loss of 3.5 stops. Normally low noise cameras that allow to shoot at ISO 1600 or higher are required when using this filter.
IMPORTANT: If you experience problems wit too low light level switch to a lighter filter such as the SF -1.5 (loss equvalent to 1.5 stops). The use of a lighter filter is always the better option than using no filter at all!
The filter can be easily cut to the needed size. The substrate of the filter is a thin plastic sheet.
Three pcs. filter sheets with the size 80x80 mm are shipped in one envelope.
The only difference against the 60x60 is a bigger sheet size.